RSF1041BK11S4K2 24" Rackmount Sliding Shelf

Overview

RSF1041BK11S4K2 vented 4 Post sliding rackmount shelf provides a simple, low cost solution to support a light to medium weight equipment in a standard 4 post 19" EIA rack. It is ideal for testing equipment, audio equipment, video equipment, keyboards, laptops, notebook, rackmount computer, Desktop or Mini Tower Computer, CRT or LCD monitors, laser, inkjet printer, network switches, telecom equipment , and laboratory equipment for researchers.

What is a sliding rackmount shelf ?

A sliding rackmount shelf is a standard 1U rackmount shelf attached to a pair of ball bearing sliding rail. The sliding shelf can be either fully retracted or fully extended outward. When it is fully retracted, its front panel is fully flush against the cabinet. You can pull the shelf out just like a drawer unit. Some of the sliding rail can only extend 75% of its body length, some can fully extend out of the cabinet. The length of extension depends on the load on the shelf. Sliding shelf offers easy access to equipment stored in the cabinet. It is especially useful if you have a very tight space in side the cabinet to work with. The fully extended sliding shelf brings the equipment out in to the open effortlessly.

What makes RSF1041BK11S4K2 different from other rack shelf?

Safety is the most important part of our design for our RSF1041BK11S4K2. Unlike other rack shelf manufactures, our shelf has built in anchor system to be use with bungee cord with hook or cable straps. There are total of 6 anchor holes on the shelf. Bungee cord with hook works putty well at preventing your bulky equipment from sliding out or moving due to vibration in either fully retracted or fully extended position. These anchor point ensures your safety as well as to protect your equipment from unnecessary damages. In addition to our anchor system, our RSF1041BK11S4K2 can be lock in place using thumb screws located at both side of the front panel when it is fully retracted. This prevents our shelf from accidently sliding out in any kind of situation. When our RSF1041BKS4K2 is fully extended, it also has a safety feature to lock itself in place. Our sliding rail system use a metal clip that clicks when it is in locked position. Most of other low cost sliding shelf manufactures use a plastic clip instead to lower cost. We believe that using a metal clip is a better choice to ensure our sliding rail stops when it is fully extended.